Steps

1. 1

   Washer Maintenance

   +

   1 minMark as done

   Clean the Drum

   Run the Tub Clean programme regularly to remove detergent residue, dirt, and odours from the drum.

   Tip: Perform a Tub Clean cycle periodically, especially if the washer is used frequently.

    

   Clean the Detergent Drawer

   Over time, detergent and fabric softener residue may build up inside the drawer.

   To clean:

   1. Remove the detergent drawer.
   2. Rinse it thoroughly under clean water.
   3. Wipe away any remaining residue.
   4. Reinstall the drawer once it is completely dry.

    

   Clean the Door Seal (Front Load Models)

   The rubber door seal can collect water, lint, and dirt.

   • Wipe the seal with a soft cloth after washing.
   • Check the folds for trapped debris or moisture.
   • Leave the washer door slightly open after each wash to allow the drum to dry.

    

   Clean the Lint Filter (Top Load Models)

   If your washer is equipped with a lint filter:

   • Remove the filter.
   • Clear away any collected lint.
   • Reinstall it securely before the next wash.

   Cleaning the lint filter regularly helps maintain washing performance.

2. 2

   Dryer Maintenance

   +

   1 minMark as done

   Clean the Lint Filter

   Clean the lint filter after every drying cycle.

   A clean lint filter helps:

   • Improve drying performance.
   • Reduce drying time.
   • Maintain efficient airflow.

    

   Clean the Door & Drum

   After use:

   • Wipe the inside of the drum with a soft, dry cloth if required.
   • Clean the door glass and door seal to remove lint or moisture.

    

   Keep the Air Vents Clear

   Ensure that the air vents around the dryer remain unobstructed to maintain proper airflow during operation.