- Detach the dust container from the main unit.
- Open the dust container.
- Empty all collected debris into a waste bin.
0 of 5 steps complete~5 min remaining
EvoSonic Ultra Filter & Filter Mask Maintenance Guide
What Parts Need Cleaning?
The EvoSonic Ultra filtration system consists of:
How Often Should I Clean the Filter?
If you notice reduced suction performance, clean the filter immediately.
Steps
- 1
- 2
Carefully remove:
- Filter
- Filter Mask
Handle the filter gently to avoid damage.
- 3
- Remove visible dust and debris.
- Gently rinse with clean water if applicable.
- Allow it to dry completely before reinstallation.
- 4
- Tap the filter gently to remove loose dust.
- If washable, rinse with clean water only.
- Do not use detergents, chemicals, or hot water.
- Allow the filter to dry completely before reuse.
⚠️ Never reinstall a damp filter.
Doing so may affect performance and damage internal components.
- 5
Once all parts are completely dry:
- Reinstall the filter.
- Reinstall the filter mask.
- Reattach the dust container.
Your EvoSonic Ultra is now ready for use.
Important Care Tips
Do
✓ Clean the dust container regularly
✓ Allow all parts to dry completely before reassembly
✓ Inspect filters for wear and damage
✓ Replace filters when necessary
Don't
❌ Use cleaning chemicals or detergents
❌ Install wet filters
❌ Use excessive force when removing components
❌ Operate the vacuum without the filter installed
Was this guide helpful?
Your feedback helps us improve every guide.Didn't find your answer?
No problem — send us the details below and a specialist will reply by email. Avg. response under 4 hours during business hours.